Cicada 5A/7A Blheli_S 1-2S 4 In 1 ESC 16x16mm - US STOCK

Cicada 5A/7A Blheli_S 1-2S 4 In 1 ESC 16x16mm - US STOCK

$29.90 $19.90
(1 review) Write a Review

Frequently Bought Together

The Cicada 5A/7A 4in1 ESC is designed to stack underneath 16x16mm flight controllers.
This 4in1 ESC has a 16x16mm bolt pattern just like the TinyFish and other micro FCs. Create a super light, super tight, and super clean build that will pack a serious punch! These ESCs have BusyBee2 chips, are BLHeli_S and DSHOT compatible. Please note this ESC goes to 2S max.

Features
Totally new MCU that comes with a three channel PWM output specifically designed for motor control applications and runs at 48mhz
New BLHELI_S firmware which provides all the strengths of the original BLHELI, but adds some significant improvements such as better response and smoother start up, 1000 steps of throttle input resolution, and auto-detection of the input signal protocol
Higher quality MOSFETs with extremely low internal resistance
Three exceptionally fast dedicated MOSFET drivers
Extra capacitance to help remove EMF spikes and keep the rest of your equipment safe
Signal Auto Detect
regular input signal (1-2ms)
DShot compatible with DShot 150, 300, and 600
Oneshot125 (125-250us)
Oneshot42 (42-84us)
Multishot (5-25us)
Weight: 2g
5A concurrent and 7A burst ratings (According to factory original description)


Specification:
Brand Name: Cicada
Item Name: 5A Blheli_S 1-2S 4 In 1 Brshless ESC
Con. Current: 5A
Peak. Current: 7A (10S)
BEC: NO
Lipo: 1-2S
Programming: YES
Weight: 2g
Size (PCB): 20x20mm
Mounting Hole: 16x16mm , Dia: M2

Features:
- Blheli_S firmware
- 16x16mm mounting hole
- Dshot600 in default out from factory
- Support Oneshot42, Oneshot125, Multishot and Dshot150, Dshot300.
-All codes use damped light mode.Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
- Chips on EFM8BB21F16,50MHZ
- The input signal is automatically detected by the ESC upon power up
- The code supports features to prevent sync loss. There are tuneable parameters that can make the code run well even in the most demanding situations, although default settings will work

 

Package Included:
1x Cicada 5A 4 In 1 ESC
1x bag of screws
1x Cable
1x Manual

The Cicada 5A/7A 4in1 ESC is designed to stack underneath 16x16mm flight controllers.
This 4in1 ESC has a 16x16mm bolt pattern just like the TinyFish and other micro FCs. Create a super light, super tight, and super clean build that will pack a serious punch! These ESCs have BusyBee2 chips, are BLHeli_S and DSHOT compatible. Please note this ESC goes to 2S max.

Features
Totally new MCU that comes with a three channel PWM output specifically designed for motor control applications and runs at 48mhz
New BLHELI_S firmware which provides all the strengths of the original BLHELI, but adds some significant improvements such as better response and smoother start up, 1000 steps of throttle input resolution, and auto-detection of the input signal protocol
Higher quality MOSFETs with extremely low internal resistance
Three exceptionally fast dedicated MOSFET drivers
Extra capacitance to help remove EMF spikes and keep the rest of your equipment safe
Signal Auto Detect
regular input signal (1-2ms)
DShot compatible with DShot 150, 300, and 600
Oneshot125 (125-250us)
Oneshot42 (42-84us)
Multishot (5-25us)
Weight: 2g
5A concurrent and 7A burst ratings (According to factory original description)


Specification:
Brand Name: Cicada
Item Name: 5A Blheli_S 1-2S 4 In 1 Brshless ESC
Con. Current: 5A
Peak. Current: 7A (10S)
BEC: NO
Lipo: 1-2S
Programming: YES
Weight: 2g
Size (PCB): 20x20mm
Mounting Hole: 16x16mm , Dia: M2

Features:
- Blheli_S firmware
- 16x16mm mounting hole
- Dshot600 in default out from factory
- Support Oneshot42, Oneshot125, Multishot and Dshot150, Dshot300.
-All codes use damped light mode.Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
- Chips on EFM8BB21F16,50MHZ
- The input signal is automatically detected by the ESC upon power up
- The code supports features to prevent sync loss. There are tuneable parameters that can make the code run well even in the most demanding situations, although default settings will work

 

Package Included:
1x Cicada 5A 4 In 1 ESC
1x bag of screws
1x Cable
1x Manual

1 Review  

  • Perfect for 2S Li-Ion 18650

    Posted by Ricardo Maroquio Bernardo on Jun 26th 2019

    5

    I'm trying to find an ESC for micro-drones for a long time. I bought 12 models of different brands. My focus is a sub 250g quadrotor aiming to maximize the flight time, so, light components are mandatory. This ESC weighs less than 5g with wires and can drain all energy from a Li-Ion 18650 cell, which differs from Li-Po because it can drop up to 2.5V. So, this is really recommended for micro-quads that use 2S Li-Ion 18650 batteries.

People who viewed this item also viewed

Compare