Cicada AIO Flight Controller (F4 FC, 4x 30A BLHeli_32 ESC, OSD, PDB, Curr)

Cicada AIO Flight Controller (F4 FC, 4x 30A BLHeli_32 ESC, OSD, PDB, Curr)

$72.90
(No reviews yet) Write a Review

Frequently Bought Together

Cicada AIO Flight Controller (F4 FC, 4x 30A BLHeli_32 ESC, OSD, PDB, Curr)

BLHeli_32 is the third generation BLHeli code, following base BLHeli and BLHeli_S.
BLHeli_32 runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz.
So what can the increased MCU speed do?
First of all, it can run input signals with lower latency at faster rates.
Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.
Secondly it allows packing of more functionality.
Programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm range, to a place where the system has low sensitivity to them.
Auto timing. Which is not the option to choose if you’re after max power. But if you want the most efficient running with very good robustness against desync, it is the perfect choice.
Programmable brake on stop force. Which allows control of the braking of fixed wing props.
Improved direction change in bidirectional mode.


Cicada AIO Flight Controller is a truly All-in-One FC that combines a F4 FC, 4x 30A BLHeli_32 bit ESCs, Betaflight OSD, PDB, 5v 3A BEC and Current Sensor all in 1 compact package and weighing only 20g!
Specification

ESC Specs:

Con.Current:30A
Peak Current(10s):35A
SBEC:3A/5V
Lipo:2-4s

FC Specs:

Betaflight Firmware target: OMNIBUSF4
F4 with OSD and CURRENT Sensor
Input: 2-4S LIPO
Output Voltage: 5V/2A
MCU: STM32F4 CPU
ICM-MPU6000 Accelerometers and Gyroscopes SPI
MicroUSB socket.
Weight:20g
Size(PCB):36*36mm, mounting hole: 30.5×30.5mm

Includes
1x 30A 4in1 ESC built-in F4 AIO flight controller
1x 16AWG Power Cable
1x Plastic spacers (M3x 5mm and 3mm tall) and screws (M3x20)

Cicada AIO Flight Controller (F4 FC, 4x 30A BLHeli_32 ESC, OSD, PDB, Curr)

BLHeli_32 is the third generation BLHeli code, following base BLHeli and BLHeli_S.
BLHeli_32 runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz.
So what can the increased MCU speed do?
First of all, it can run input signals with lower latency at faster rates.
Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.
Secondly it allows packing of more functionality.
Programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm range, to a place where the system has low sensitivity to them.
Auto timing. Which is not the option to choose if you’re after max power. But if you want the most efficient running with very good robustness against desync, it is the perfect choice.
Programmable brake on stop force. Which allows control of the braking of fixed wing props.
Improved direction change in bidirectional mode.


Cicada AIO Flight Controller is a truly All-in-One FC that combines a F4 FC, 4x 30A BLHeli_32 bit ESCs, Betaflight OSD, PDB, 5v 3A BEC and Current Sensor all in 1 compact package and weighing only 20g!
Specification

ESC Specs:

Con.Current:30A
Peak Current(10s):35A
SBEC:3A/5V
Lipo:2-4s

FC Specs:

Betaflight Firmware target: OMNIBUSF4
F4 with OSD and CURRENT Sensor
Input: 2-4S LIPO
Output Voltage: 5V/2A
MCU: STM32F4 CPU
ICM-MPU6000 Accelerometers and Gyroscopes SPI
MicroUSB socket.
Weight:20g
Size(PCB):36*36mm, mounting hole: 30.5×30.5mm

Includes
1x 30A 4in1 ESC built-in F4 AIO flight controller
1x 16AWG Power Cable
1x Plastic spacers (M3x 5mm and 3mm tall) and screws (M3x20)

No reviews yet.

People who viewed this item also viewed

Compare