Jumper T8SG V3 Plus Carbon Panel Edition Hall Gimbal Multi-protocol Advanced Transmitter
$89.90
Jumper T8SG V3 Plus Carbon Special Edition Hall Gimbal Multi-protocol Advanced Transmitter for Flysky Frsky
Description:
Brand: Jumper
Item No.: T8SG V2 Plus T8SG V3
Size: 158 x 150 x 58mm
Weight: 338g (without battery)
Color: Carbon fiber
Transmission frequency: 2.400GHZ-2.7GHZ
Transmitter Module: Four in One High Frequency Module (CC2500 CYRF6936 A7105 NRF2401)
Transmit power: maximum 22dbm (transmit power adjustable)
Antenna gain: 2db (detachable antenna, easy modification)
Working current: 88Ma@8.4V
Working voltage: DC4.5-DC18V
Remote control distance:> 2km @ 22dbm
Open source firmware:
Number of channels: up to 12 channels (depending on the receiver)
Display: 2.42-inch OLED display, 128 * 64 resolution
Rocker way: non-contact 3D space vector Hall joystick
JR/FrSKY compatible module bay on rear side
Upgrade method: USB online upgrade
Support Protocols:
* Walkera full range
* DSM2/X full range
* Flysky and Flysky 2A
* FrSKY
* FUTABA s-fhss full range
* WL Toy series, Hubsan series, Esky series and many more (Currently a total of more than 40 supported protocols)
Uses open source software with continued support and development, adding new protocols regularly.
Simulator mode: 3.5mm standard ppm output
USB output.
Features:
Built in four-in-1 RF Module (CC2500 CYRF6936 A7105 NRF2401).
Open source multi-protocol firmware, compatible with most mainstream remote controls
Non-contact 3D space vector Hall remote sensing Gimbals (T8SG V2 Plus T8SG V3 Only).
JR/FrSKY compatible module bay on rear side.
USB online firmware upgrade.
Transmission power adjustable to adapt to different location requirements.
Detachable antenna, easy to change.
Ultra-low power consumption, longer battery life.
Up to 12 channels of output (depending on the receiver), Open Source Firmware, all channels are fully programmable.
Wide voltage input (2s lipo recommended).
Multilingual menu.
Vibration reminder function.
Support telemetry (depending on the receiver).
Updated Case design with 18650 Battery Tray.
Built in Voice support.
T8SG V3 improvements:
1.) All new tooling design gives a unique appearance and ergonomic feel.
2.) Two addition top switches added.
3.) Improved switch quality on all switches for better reliability and quality feel.
4.) All new HALL SENSOR Gimbal design gives finer accuracy and crisp response.
5.) JR module bay added for third party RF Modules
6.) Front dials changed to Side scroll wheels for improved usability.
7.) External USB port for added convenience.
8.) 2.7” Backlit OLED Display
8.) Added 18650 Battery tray for easy battery installation (2s Lipo optional)
9.) Improved on off switch with dual LED Status indicators.
10.) Improved shipping box, high strength with high end appearance.
11.) Quick start guide included.
RF Chip Data
Description:
Brand: Jumper
Item No.: T8SG V2 Plus T8SG V3
Size: 158 x 150 x 58mm
Weight: 338g (without battery)
Color: Carbon fiber
Transmission frequency: 2.400GHZ-2.7GHZ
Transmitter Module: Four in One High Frequency Module (CC2500 CYRF6936 A7105 NRF2401)
Transmit power: maximum 22dbm (transmit power adjustable)
Antenna gain: 2db (detachable antenna, easy modification)
Working current: 88Ma@8.4V
Working voltage: DC4.5-DC18V
Remote control distance:> 2km @ 22dbm
Open source firmware:
Number of channels: up to 12 channels (depending on the receiver)
Display: 2.42-inch OLED display, 128 * 64 resolution
Rocker way: non-contact 3D space vector Hall joystick
JR/FrSKY compatible module bay on rear side
Upgrade method: USB online upgrade
Support Protocols:
* Walkera full range
* DSM2/X full range
* Flysky and Flysky 2A
* FrSKY
* FUTABA s-fhss full range
* WL Toy series, Hubsan series, Esky series and many more (Currently a total of more than 40 supported protocols)
Uses open source software with continued support and development, adding new protocols regularly.
Simulator mode: 3.5mm standard ppm output
USB output.
Features:
Built in four-in-1 RF Module (CC2500 CYRF6936 A7105 NRF2401).
Open source multi-protocol firmware, compatible with most mainstream remote controls
Non-contact 3D space vector Hall remote sensing Gimbals (T8SG V2 Plus T8SG V3 Only).
JR/FrSKY compatible module bay on rear side.
USB online firmware upgrade.
Transmission power adjustable to adapt to different location requirements.
Detachable antenna, easy to change.
Ultra-low power consumption, longer battery life.
Up to 12 channels of output (depending on the receiver), Open Source Firmware, all channels are fully programmable.
Wide voltage input (2s lipo recommended).
Multilingual menu.
Vibration reminder function.
Support telemetry (depending on the receiver).
Updated Case design with 18650 Battery Tray.
Built in Voice support.
T8SG V3 improvements:
1.) All new tooling design gives a unique appearance and ergonomic feel.
2.) Two addition top switches added.
3.) Improved switch quality on all switches for better reliability and quality feel.
4.) All new HALL SENSOR Gimbal design gives finer accuracy and crisp response.
5.) JR module bay added for third party RF Modules
6.) Front dials changed to Side scroll wheels for improved usability.
7.) External USB port for added convenience.
8.) 2.7” Backlit OLED Display
8.) Added 18650 Battery tray for easy battery installation (2s Lipo optional)
9.) Improved on off switch with dual LED Status indicators.
10.) Improved shipping box, high strength with high end appearance.
11.) Quick start guide included.
RF Chip Data
Package included:
1x Jumper T8SG V3 Plus Transmitter Carbon Edition