FrSky PPM Telemetry ¨C S.Bus Receiver Failsafe

FrSky PPM Telemetry ¨C S.Bus Receiver Failsafe

$8.09
(No reviews yet) Write a Review

Frequently Bought Together

FrSky PPM Telemetry ¨C S.Bus Receiver Failsafe 2.4GHz 8CH Compatible with DHT DFT DJT XJT X9D Plus X9E Protocol for FPV Racing Quadcopter


Features:
Super compact PPM SBus Telemetry receiver Support RSSI and Voltage Feedback.
Communication range stretches up to 700m near the ground in urban area and 1km in the sky, which is ideal for KT fixed-wing airplanes, small electric helicopters, racing multicopters and so on
Compatible with FrSky remote control series and LNB, such as FrSky X9D remote control ( D8 mode ); XJT ( D8 mode ), DJT, DFT, and DHT LNB
Supports protocols of DHT, DFT, DJT, XJT, X9D Plus and X9E
Designed for FPV racing quadcopters, weighs less than 1g. Compatible with Frsky D protocols
Specification
Signal range: 700m near the ground, 1km in the sky
Signal frequency resolution: 1024
Output interface: PPM and SBus
Voltage: 5V
Current: 100mA
Size: 2.0 x 1.20 x 0.20 cm / 0.80 x 0.47 x 0.08 inch
Weight: less than 1g
Code matching process:
1. Choose D8 Mode from your X9D transmitter, short ¡°Bind¡± to close the circuit of the receiver, then the LED will be lit. Choose ¡°Bind¡± and the LED of the receiver will go out, indicating the completion of code matching. Exit the code-matching mode, disconnect ¡°Bind¡± from the short circuit and power the receiver again.
2. Press the button on the DJT / DFT LNB to turn on and enter the code matching mode. Short ¡°Bind¡± to close the circuit of the receiver, and the LED will go out, indicating the completion of code matching. Restart the remote control, disconnect ¡°Bind¡± from the short circuit and power the receiver again.
3. Choose D8 Mode of the XJT LNB via the DIP switch and follow the above-mentioned Process.

PPM output mode, short circuit the PPM PCB pad
S.Bus output mode, short circuit the S.Bus PCB pad
Telemetry ports: A1 and A2 are the analog telemetry ports on the receiver (A1,A2 Max Voltage is 3S 12.6v Lipo Battery, it may damage the receiver permanently if the votage exceed that)
You need to enble the VBAT feature in the cleanflight to receive the battery voltage monitor buzzer warning
Note: It only supports fail-safe of the 3rd channel. No custom setting is feasible. Please always keep the throttle at the third channel to enable the function.
Package includes:
1 x Hobbymate Frsky Compatible Receiver w/ Telemetry, RSSI

FrSky PPM Telemetry ¨C S.Bus Receiver Failsafe 2.4GHz 8CH Compatible with DHT DFT DJT XJT X9D Plus X9E Protocol for FPV Racing Quadcopter


Features:
Super compact PPM SBus Telemetry receiver Support RSSI and Voltage Feedback.
Communication range stretches up to 700m near the ground in urban area and 1km in the sky, which is ideal for KT fixed-wing airplanes, small electric helicopters, racing multicopters and so on
Compatible with FrSky remote control series and LNB, such as FrSky X9D remote control ( D8 mode ); XJT ( D8 mode ), DJT, DFT, and DHT LNB
Supports protocols of DHT, DFT, DJT, XJT, X9D Plus and X9E
Designed for FPV racing quadcopters, weighs less than 1g. Compatible with Frsky D protocols
Specification
Signal range: 700m near the ground, 1km in the sky
Signal frequency resolution: 1024
Output interface: PPM and SBus
Voltage: 5V
Current: 100mA
Size: 2.0 x 1.20 x 0.20 cm / 0.80 x 0.47 x 0.08 inch
Weight: less than 1g
Code matching process:
1. Choose D8 Mode from your X9D transmitter, short ¡°Bind¡± to close the circuit of the receiver, then the LED will be lit. Choose ¡°Bind¡± and the LED of the receiver will go out, indicating the completion of code matching. Exit the code-matching mode, disconnect ¡°Bind¡± from the short circuit and power the receiver again.
2. Press the button on the DJT / DFT LNB to turn on and enter the code matching mode. Short ¡°Bind¡± to close the circuit of the receiver, and the LED will go out, indicating the completion of code matching. Restart the remote control, disconnect ¡°Bind¡± from the short circuit and power the receiver again.
3. Choose D8 Mode of the XJT LNB via the DIP switch and follow the above-mentioned Process.

PPM output mode, short circuit the PPM PCB pad
S.Bus output mode, short circuit the S.Bus PCB pad
Telemetry ports: A1 and A2 are the analog telemetry ports on the receiver (A1,A2 Max Voltage is 3S 12.6v Lipo Battery, it may damage the receiver permanently if the votage exceed that)
You need to enble the VBAT feature in the cleanflight to receive the battery voltage monitor buzzer warning
Note: It only supports fail-safe of the 3rd channel. No custom setting is feasible. Please always keep the throttle at the third channel to enable the function.
Package includes:
1 x Hobbymate Frsky Compatible Receiver w/ Telemetry, RSSI
No reviews yet.

People who viewed this item also viewed

Compare