FrSky Taranis X9D Plus 16-channel 2.4ghz ACCST Radio Transmitter

FrSky Taranis X9D Plus 16-channel 2.4ghz ACCST Radio Transmitter

$215.99
(No reviews yet) Write a Review

Frequently Bought Together

Taranis X9D Plus Transmitter - US Type Charger
Carry Case and Receiver NOT included
Compatibility: FrSky X series,D series and V8-ll series receives
Channels: Up to 16 channels
Operating Voltage: 6 - 15V(2S,3S Lipos are acceptable)


Product description
Model Name:Taranis X9D Plus EU Specifications: Number of Channels: Up to 16 channels Operating Voltage Range:6~15V (2S, 3S Lipos are acceptable) Operating Current: 260mA maximum (both RF module and backlit are on) Operating Temperature: -10~60 Backlight LCD Screen: 212*64, 2 color combinations for select Model Memories: 60 (extendable by SD card) Compatibility: FrSky X series, D series and V8-II series receivers (plus other receivers if an external module is used) Taranis X9D Plus-EU version is only compatible with X series receiver EU version. Features: Quad Ball Bearing Gimbals Receiver Match Audio Speech Outputs (values, alarms, settings, etc.) Real-time Flight Data Logging Receiver Signal Strength Indicator (RSSI) Alerts Super Low Latency Smart Port Supported Vibration Alerts. Notes and Warnings. Please connect the provided battery in the battery compartment before use. The six-cell NiMH battery is for use only in your TARANIS X9D Plus. Be sure to use the built-in battery charger to charge the battery. Be careful not to drop the battery. Don't pull the battery wires as this could produce,short-circuits and cause the battery to explode. Do not remove the battery from the TARANIS X9D Plus transmitter while the voltage warning is blinking as this could cause internal settings and memories to be destroyed. Do not use the transmitter if a “Backup Error” warning occurs. Be sure to turn off the Taranis X9D Plus before charging the battery. The Power Indicator LED will be on during charging, and be off after the charging is finished. Be sure to turn off the power of the transmitter before inserting or removing the MicroSD card. As the MicroSD card is a precision device, do not use excessive force when inserting If model data generated by a transmitter with a new software version is copied to an one with older software, the transmitter may not operate correctly. Before copying the model data, update the destination transmitter to the new software version. Do not expose the MicroSD card to dirt, moisture,water or fluids of any kind. Never remove the MicroSD card or turn off power while entering data. Never store the MicroSD card where it may be subject to strong static electricity or magnetic fields. Do not expose the MicroSD card to direct sunlight, excessive humidity or corrosive environments. Be certain to insert the MicroSD card in the correct direction.


Package content:
1X X9D remote control


1X remote control device


1X charger


1X 6S Ni MH battery

 

Taranis X9D Plus Transmitter - US Type Charger
Carry Case and Receiver NOT included
Compatibility: FrSky X series,D series and V8-ll series receives
Channels: Up to 16 channels
Operating Voltage: 6 - 15V(2S,3S Lipos are acceptable)


Product description
Model Name:Taranis X9D Plus EU Specifications: Number of Channels: Up to 16 channels Operating Voltage Range:6~15V (2S, 3S Lipos are acceptable) Operating Current: 260mA maximum (both RF module and backlit are on) Operating Temperature: -10~60 Backlight LCD Screen: 212*64, 2 color combinations for select Model Memories: 60 (extendable by SD card) Compatibility: FrSky X series, D series and V8-II series receivers (plus other receivers if an external module is used) Taranis X9D Plus-EU version is only compatible with X series receiver EU version. Features: Quad Ball Bearing Gimbals Receiver Match Audio Speech Outputs (values, alarms, settings, etc.) Real-time Flight Data Logging Receiver Signal Strength Indicator (RSSI) Alerts Super Low Latency Smart Port Supported Vibration Alerts. Notes and Warnings. Please connect the provided battery in the battery compartment before use. The six-cell NiMH battery is for use only in your TARANIS X9D Plus. Be sure to use the built-in battery charger to charge the battery. Be careful not to drop the battery. Don't pull the battery wires as this could produce,short-circuits and cause the battery to explode. Do not remove the battery from the TARANIS X9D Plus transmitter while the voltage warning is blinking as this could cause internal settings and memories to be destroyed. Do not use the transmitter if a “Backup Error” warning occurs. Be sure to turn off the Taranis X9D Plus before charging the battery. The Power Indicator LED will be on during charging, and be off after the charging is finished. Be sure to turn off the power of the transmitter before inserting or removing the MicroSD card. As the MicroSD card is a precision device, do not use excessive force when inserting If model data generated by a transmitter with a new software version is copied to an one with older software, the transmitter may not operate correctly. Before copying the model data, update the destination transmitter to the new software version. Do not expose the MicroSD card to dirt, moisture,water or fluids of any kind. Never remove the MicroSD card or turn off power while entering data. Never store the MicroSD card where it may be subject to strong static electricity or magnetic fields. Do not expose the MicroSD card to direct sunlight, excessive humidity or corrosive environments. Be certain to insert the MicroSD card in the correct direction.


Package content:
1X X9D remote control


1X remote control device


1X charger


1X 6S Ni MH battery

 

No reviews yet.

People who viewed this item also viewed

Compare