HOBBYMATE 5" fpv racing drone kits / pnp

HOBBYMATE 5" fpv racing drone kits / pnp

$249.90 $179.90
(2 reviews) Write a Review

Frequently Bought Together

HOBBYMATE Comet VX220 Stretch X 5" fpv racing drone is a high-performance Plug and Play FPV racing drone

Low-deck design means centralized mass and excellent handling.
Stretched-X motor layout is the choice of top racers because the rear props are further from the "dirty air" coming from the front props.
The result is smoother cornering and higher top speed.

Comet VX220 fpv drone is a combination of high performance, stability and durability
Comes with airbot F4 V6 flight controller and typhoon 35A (Max 45A), simple connection between the fc and esc with a 8pin cable, save your time of buidling and maitanence

Note: The PNP does NOT come with a receiver. XM+ or R-XSR recommended.

Features
5mm full 3k carbon fiber twill
High quality 12.9 class Steel counter-sunk screws on the drone
Airbot F4 V6 flight controller, tested and proved raliable result
Airbot typhoon BLheli_32 4in1 ESC 35A provide the drone great power, also with telemetry function and overheat protection
The flight controller support Betaflight OSD.
Change PIDs and Rates using your transmitter sticks or camera
Switchable 0-600mw VTx video transmitter, support smart audio via camera and FC
MMCX antenna connector for easy, secure connection. Won’t break or come loose like the IPEX connector used on other vTX.

Foxeer Arrow Pro Micro FPV camera support osd
Foxeer Lollipop 2 2.5DBi 5.8G Super Mini Antenna

Specifications
F4 V6 flight controller
OMNIBUS F4's upgrade version, using F405 and new target, with 5x UARTs now.
Classic OMNIBUS design, using F4 MCU controls OSD over SPI bus, compare the first version, we added BMP280 as barometer and SD Card supports.
OSD Configuration has been incl. in Betaflight GUI.
FC incl. 5V1A BEC on board(3-6s) and 1x 8V BEC for Camera
MPU6000 at SPI bus, Ext, SPI for damped gyro
Use fireworks v2 firmware, in CLI, set gyro_to_use = SECOND
New version with 8PIN Sh1.0 Socket, could be much easier connect to our 4in1 ESC by one cable.
On v5, we added jumpers for Current source select, please read the manual and set the jumper before using the FC.

Typhoon 4in1 ESC 35A
STM32 processor, BLHeli_32 firmware (registered, upgradable)
ESC Telemetry
Amp Sensors
3-6S LiPo input
VBAT out
No BEC
Supports up to DSHOT1200, Oneshot / Multishot / PWM
Size: 36x36mm, mount holes 30.5x30.5mm

Comet Vx220 Frame
5" Platform
Ultra Small Profile
Proven Results
Light weight designed and durability with 5mm detachable arms
19*19mm mounting size camera only

Motors:
HOBBYMATE 2305 fpv racing competition version made by rcinpower

Camera:
Foxeer Arrow Micro Pro 600TVL FPV Camera 4:3 with OSD 1.8mm / 2.1mm lens FOV 125

Antenna:
Foxeer Lollipop 2, 2.5DBI 5.8G

Receivers: (Optional)
Frsky XM+, R-xsr, dsm, flysky

Props: Dalprop 5045 3-blade / Gemfan 5152 3-blade (RECOMMENDED, THE PROPS IS NOT INCLUDED)

Package Includes
1x HOBBYMATE FPV racing drone (PNP / KITS)

Note: if you choose Kits, all parts inc. electronic parts will be included in the package, but not assembled.

*RTF version has no lipo battery included in the package, all others parts are ready.

HOBBYMATE Comet VX220 Stretch X 5" fpv racing drone is a high-performance Plug and Play FPV racing drone

Low-deck design means centralized mass and excellent handling.
Stretched-X motor layout is the choice of top racers because the rear props are further from the "dirty air" coming from the front props.
The result is smoother cornering and higher top speed.

Comet VX220 fpv drone is a combination of high performance, stability and durability
Comes with airbot F4 V6 flight controller and typhoon 35A (Max 45A), simple connection between the fc and esc with a 8pin cable, save your time of buidling and maitanence

Note: The PNP does NOT come with a receiver. XM+ or R-XSR recommended.

Features
5mm full 3k carbon fiber twill
High quality 12.9 class Steel counter-sunk screws on the drone
Airbot F4 V6 flight controller, tested and proved raliable result
Airbot typhoon BLheli_32 4in1 ESC 35A provide the drone great power, also with telemetry function and overheat protection
The flight controller support Betaflight OSD.
Change PIDs and Rates using your transmitter sticks or camera
Switchable 0-600mw VTx video transmitter, support smart audio via camera and FC
MMCX antenna connector for easy, secure connection. Won’t break or come loose like the IPEX connector used on other vTX.

Foxeer Arrow Pro Micro FPV camera support osd
Foxeer Lollipop 2 2.5DBi 5.8G Super Mini Antenna

Specifications
F4 V6 flight controller
OMNIBUS F4's upgrade version, using F405 and new target, with 5x UARTs now.
Classic OMNIBUS design, using F4 MCU controls OSD over SPI bus, compare the first version, we added BMP280 as barometer and SD Card supports.
OSD Configuration has been incl. in Betaflight GUI.
FC incl. 5V1A BEC on board(3-6s) and 1x 8V BEC for Camera
MPU6000 at SPI bus, Ext, SPI for damped gyro
Use fireworks v2 firmware, in CLI, set gyro_to_use = SECOND
New version with 8PIN Sh1.0 Socket, could be much easier connect to our 4in1 ESC by one cable.
On v5, we added jumpers for Current source select, please read the manual and set the jumper before using the FC.

Typhoon 4in1 ESC 35A
STM32 processor, BLHeli_32 firmware (registered, upgradable)
ESC Telemetry
Amp Sensors
3-6S LiPo input
VBAT out
No BEC
Supports up to DSHOT1200, Oneshot / Multishot / PWM
Size: 36x36mm, mount holes 30.5x30.5mm

Comet Vx220 Frame
5" Platform
Ultra Small Profile
Proven Results
Light weight designed and durability with 5mm detachable arms
19*19mm mounting size camera only

Motors:
HOBBYMATE 2305 fpv racing competition version made by rcinpower

Camera:
Foxeer Arrow Micro Pro 600TVL FPV Camera 4:3 with OSD 1.8mm / 2.1mm lens FOV 125

Antenna:
Foxeer Lollipop 2, 2.5DBI 5.8G

Receivers: (Optional)
Frsky XM+, R-xsr, dsm, flysky

Props: Dalprop 5045 3-blade / Gemfan 5152 3-blade (RECOMMENDED, THE PROPS IS NOT INCLUDED)

Package Includes
1x HOBBYMATE FPV racing drone (PNP / KITS)

Note: if you choose Kits, all parts inc. electronic parts will be included in the package, but not assembled.

*RTF version has no lipo battery included in the package, all others parts are ready.

2 Reviews  

  • Almost 5 stars ..... major Video Noise in Video Feed

    Posted by Kyle Lucas on Nov 18th 2018

    4

    This is a nice quad with nice components. Stock tune is pretty solid... minimal adjustments needed. Be sure to BLUE Loctite ALL SCREWS... most a loose upon arrival (good thing to do a normal pre maiden check).

    The video noise is the real star KNOCK on this quad. I will need to add Capacitor(s) to filter the noise.... maybe need to change VTX power feed to kill the noise. To Be Determined.

    Hey Hobbycool - contact me and I will let you know my fixes, so you can add them to your production and make this a KNOCK OUT BnF quad.

    Get one.... it is nice for the money.

  • Solid Contender!

    Posted by Don Ehoff on Nov 12th 2018

    5

    This quadcopter is one of the best in my inventory for price/value. I have anything from 5" entry level FPV quads (Wizard 220) to more quality CM Merica/Armattan Rooster quads. The motors are nice (I have the 2500 kv version), CF frame is stiff and feels durable. The stack has quality parts and the Foxeer camera and V2 Lollipop antenna make great additions! The solder joints look quality and I'm really impressed with the build. The only item not included are the props, which is kind of a personal choice anyway, and you might want to add a sticky battery pad to the bottom, but that's it! I would put this on the performance level with the EMAX Hawk 5 and a few others, but they can't beat the COMET's lower price. Way to go HobbyCool !!!

People who viewed this item also viewed

Compare