Hobbywing XRotor Micro 40A esc 4in1

Hobbywing XRotor Micro 40A esc 4in1

$59.90
(No reviews yet) Write a Review

Frequently Bought Together

Hobbywing XRotor Micro 40A 2-5S 4 in 1 BLHeli_S DShot600 Ready Brushless ESC for RC Drone FPV Racing

Highly Integrated & Compact
The 4-in-1 ESC not only includes 4 high-performance 40A ESCs, 1 built-in BEC,
but also an Amp/Volt monitoring port which allows FC to monitor the volt & amp
in real time (on condition that the FC supports this function); it¡¯s as small as a
FC for FPV(s) and easy for installation and wiring. With the remarkably small
size, it's a perfect match for competition FPV(s).

High-quality Components
The use of EMF8BB21F16G MCUs with the operating frequency of up to
48MHz, imported high quality MOSFETs, 3-in-1 drive ICs and ceramic
capacitors, 3-ounce copper, and 6 layers of PCBs guarantees less heat,
higher efficiency and rapider response.

Hardware Generated PWM & Damped Light Mode
The ESC firmware uses hardware generated motor pwm for smooth
throttle response and silent operation. Damped light does regenerative
breaking, causing very fast motor retardation, and it inherently also
does active freewheeling.

Specification:
Brand name: Hobbywing
Item name: XRotor 40A ESC
Cont./Peak Current: 40Ax4/50Ax4
Input Voltage: 2-5S Lipo
BEC output: 5V & 1.5A
Firmware: BLHeli_S A-H-50 16.5
Input Wires: Red-14AWG-130mm / Black-14AWG-130mm
Output Wires: No wires but solder tabs
Support: DShot150/300/600, Oneshot125 Mode , Oneshot42 Mode
Size: 42.6x36x4mm
Weight: 10g

Package Included:
1 X 40A ESC
4 X Nylon Standoffs
1 X XT60 Power Lead
1 X Capacitor
1 X Data Cables

Hobbywing XRotor Micro 40A 2-5S 4 in 1 BLHeli_S DShot600 Ready Brushless ESC for RC Drone FPV Racing

Highly Integrated & Compact
The 4-in-1 ESC not only includes 4 high-performance 40A ESCs, 1 built-in BEC,
but also an Amp/Volt monitoring port which allows FC to monitor the volt & amp
in real time (on condition that the FC supports this function); it¡¯s as small as a
FC for FPV(s) and easy for installation and wiring. With the remarkably small
size, it's a perfect match for competition FPV(s).

High-quality Components
The use of EMF8BB21F16G MCUs with the operating frequency of up to
48MHz, imported high quality MOSFETs, 3-in-1 drive ICs and ceramic
capacitors, 3-ounce copper, and 6 layers of PCBs guarantees less heat,
higher efficiency and rapider response.

Hardware Generated PWM & Damped Light Mode
The ESC firmware uses hardware generated motor pwm for smooth
throttle response and silent operation. Damped light does regenerative
breaking, causing very fast motor retardation, and it inherently also
does active freewheeling.

Specification:
Brand name: Hobbywing
Item name: XRotor 40A ESC
Cont./Peak Current: 40Ax4/50Ax4
Input Voltage: 2-5S Lipo
BEC output: 5V & 1.5A
Firmware: BLHeli_S A-H-50 16.5
Input Wires: Red-14AWG-130mm / Black-14AWG-130mm
Output Wires: No wires but solder tabs
Support: DShot150/300/600, Oneshot125 Mode , Oneshot42 Mode
Size: 42.6x36x4mm
Weight: 10g

Package Included:
1 X 40A ESC
4 X Nylon Standoffs
1 X XT60 Power Lead
1 X Capacitor
1 X Data Cables

No reviews yet.
Compare