Hobbywing XRotor Nano F4 Flight Controller

Hobbywing XRotor Nano F4 Flight Controller

$33.90
(No reviews yet) Write a Review

Frequently Bought Together

Hobbywing XRotor Nano F4 Flight Controller AIO OSD 5V BEC for RC Drone FPV Racing

Super Fast Operating Speed
The STM32F405 MCU which features the powerful
computing capacity and super fast operating speed can
support the PID controller with higher cyclic frequency &
the gyro with higher refresh rate.

Built-in BEC & OSD
The built-in BEC (5V/1.5A) can provide
power for various electronic devices;
the internal OSD allows users to adjust
or set all OSD parameters via the
Betaflight/Cleanflight software easily.

Brand Name: Hobbywing
Model: XRotor Nano F4
Item Name: Omnibus F4 Flight Controller Integrated with OSD BEC
Firmware Version: OMNIBUSF4SD
MCU: STM32 F405
Accelerometer & Gyro: MPU6000
- With onboard OSD, controlled by F4 MCU
BEC: 5V @ 1A
Mounting Hole: 20x20mm
Size: 27x27mm
Weight: 3.3g
- Voltage Monitor: Supported
- Current Monitor: Supported
- External Buzzer: Supported
- LED Controll: Supported
- USB Port: MicroUSB
- FC Programming: Suppored
- Programming Via: Betaflight / Cleanflight-Configurator
Compatibel with ( Modes): PWM, Oneshot125, Oneshot42, Multishot, DShot150, DShot300
DShot600, DShot1200 and Proshot1000
Compatible with ( Transmitter): PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL
Application: 130mm & below FPVs

Features:
-Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via the Betaflight software. (Note: the OSD is controlled by the F4 MCU.)

-The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software is more applicable to FPV race.

-TF-card which can record and save more flightack box data allows users to adjust the setup of their aircraft easily.

- Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and etc.

- LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC.

- Volt/Amp monitoring port allows users to check the battery voltage ( VBAT+ port ) and current ( CRT port ) (extra current meter is needed).

- Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft.

- Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters.

Package Included:
1x Hobbywing XRotor Nano F4 Flight Controller

Hobbywing XRotor Nano F4 Flight Controller AIO OSD 5V BEC for RC Drone FPV Racing

Super Fast Operating Speed
The STM32F405 MCU which features the powerful
computing capacity and super fast operating speed can
support the PID controller with higher cyclic frequency &
the gyro with higher refresh rate.

Built-in BEC & OSD
The built-in BEC (5V/1.5A) can provide
power for various electronic devices;
the internal OSD allows users to adjust
or set all OSD parameters via the
Betaflight/Cleanflight software easily.

Brand Name: Hobbywing
Model: XRotor Nano F4
Item Name: Omnibus F4 Flight Controller Integrated with OSD BEC
Firmware Version: OMNIBUSF4SD
MCU: STM32 F405
Accelerometer & Gyro: MPU6000
- With onboard OSD, controlled by F4 MCU
BEC: 5V @ 1A
Mounting Hole: 20x20mm
Size: 27x27mm
Weight: 3.3g
- Voltage Monitor: Supported
- Current Monitor: Supported
- External Buzzer: Supported
- LED Controll: Supported
- USB Port: MicroUSB
- FC Programming: Suppored
- Programming Via: Betaflight / Cleanflight-Configurator
Compatibel with ( Modes): PWM, Oneshot125, Oneshot42, Multishot, DShot150, DShot300
DShot600, DShot1200 and Proshot1000
Compatible with ( Transmitter): PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL
Application: 130mm & below FPVs

Features:
-Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via the Betaflight software. (Note: the OSD is controlled by the F4 MCU.)

-The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software is more applicable to FPV race.

-TF-card which can record and save more flightack box data allows users to adjust the setup of their aircraft easily.

- Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and etc.

- LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC.

- Volt/Amp monitoring port allows users to check the battery voltage ( VBAT+ port ) and current ( CRT port ) (extra current meter is needed).

- Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft.

- Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters.

Package Included:
1x Hobbywing XRotor Nano F4 Flight Controller

No reviews yet.

People who viewed this item also viewed

Compare