Hobbywing XRotor Omnibus F4 Flight Controller

Hobbywing XRotor Omnibus F4 Flight Controller

$38.90
(No reviews yet) Write a Review

Frequently Bought Together

Hobbywing XRotor Omnibus F4 Flight Controller Built-in OSD Support DShot1200 Tf Card Insertion for RC Drone

Super-high Running Frequency
The STM32F405 MCU which features the powerful computing capability and super-high
running frequency allows the FC to run the PID and gyro with higher frequency.

TF-card Insertion Supported
A TF-card can be inserted into the FC to record and save more flight data,
which allows users to adjust their aircraft easily.

Onboard OSD Microchip
Onboard OSD microchip allows users to
easily adjust various (OSD) parameters via
the Betaflight/Cleanflight software.

BetaFlight/Cleanflight Firmware Ready
The FC which supports Betaflight/Cleanflight firmware & allows parameter adjustment via Betaflight /Cleanflight software is more applicable to FPV flying & racing.

Brand Name: Hobbywing
Model: Rotor F4
Item Name: Omnibus F4 Flight Controller Bulit-in OSD
MCU: STM32 F405 MCU
MPU: MPU6000 SPI Sensor
Firmware Version: OMNIBUSF4SD
Size: 35x35mm
Mounting Holes: 30.5x30.5mm
-Support PWM, Oneshot42, Oneshot125, Multishot,
Dshot150, Dshot300 and Dshot600
-Compatible with PPM, Spektrum, SBUS, SUMD, SUMH, XBUS,
IBUS, JETIEXBUS, CRSF and SRXL Transmitter

Features:
-STM32 F405 MCU allows the FC to run the PID looptime and gyro with higher frequency.
-SPI Sensor MPU6000 includes an accelerometer and a gyro.
-Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via the Betaflight software. (Note: the OSD is controlled by the F4 MCU.)
-The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software is more applicable to FPV race.
-TF-card which can record and save more flight/back box data allows users to adjust the setup of their aircraft easily.
-Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and etc.
-LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC.
-Volt/Amp monitoring port allows users to check the battery voltage ( VBAT+ port ) and current (CRT port ) (extra current meter is needed).
-Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft.
-Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters.

Package Included:
1x F4 Flight Controller

Hobbywing XRotor Omnibus F4 Flight Controller Built-in OSD Support DShot1200 Tf Card Insertion for RC Drone

Super-high Running Frequency
The STM32F405 MCU which features the powerful computing capability and super-high
running frequency allows the FC to run the PID and gyro with higher frequency.

TF-card Insertion Supported
A TF-card can be inserted into the FC to record and save more flight data,
which allows users to adjust their aircraft easily.

Onboard OSD Microchip
Onboard OSD microchip allows users to
easily adjust various (OSD) parameters via
the Betaflight/Cleanflight software.

BetaFlight/Cleanflight Firmware Ready
The FC which supports Betaflight/Cleanflight firmware & allows parameter adjustment via Betaflight /Cleanflight software is more applicable to FPV flying & racing.

Brand Name: Hobbywing
Model: Rotor F4
Item Name: Omnibus F4 Flight Controller Bulit-in OSD
MCU: STM32 F405 MCU
MPU: MPU6000 SPI Sensor
Firmware Version: OMNIBUSF4SD
Size: 35x35mm
Mounting Holes: 30.5x30.5mm
-Support PWM, Oneshot42, Oneshot125, Multishot,
Dshot150, Dshot300 and Dshot600
-Compatible with PPM, Spektrum, SBUS, SUMD, SUMH, XBUS,
IBUS, JETIEXBUS, CRSF and SRXL Transmitter

Features:
-STM32 F405 MCU allows the FC to run the PID looptime and gyro with higher frequency.
-SPI Sensor MPU6000 includes an accelerometer and a gyro.
-Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via the Betaflight software. (Note: the OSD is controlled by the F4 MCU.)
-The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software is more applicable to FPV race.
-TF-card which can record and save more flight/back box data allows users to adjust the setup of their aircraft easily.
-Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and etc.
-LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC.
-Volt/Amp monitoring port allows users to check the battery voltage ( VBAT+ port ) and current (CRT port ) (extra current meter is needed).
-Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft.
-Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters.

Package Included:
1x F4 Flight Controller
No reviews yet.

People who viewed this item also viewed

Compare