LD-27MG Full Metal Gear Standard Digital Servo with 20kg High Torque

LD-27MG Full Metal Gear Standard Digital Servo with 20kg High Torque

$17.99
(No reviews yet) Write a Review

Frequently Bought Together

20kg large torque. 20 kg·cm (277.6 oz·in) @ 6.6V. Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)
Full metal gear. it's better for accuracy, service life has been greatly increased
Aluminium Case. Enhance the heat dissipation, ensure that servo motor can work well
Using high-precision potentiometer with new design. Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of making robots.
270 degree rotation. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control. Can be rotated within 360 degrees when power off

 

Product description
Specifications:
Weight: 65g(2.32OZ)
Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)
Speed: 0.16sec/60°(7.4V)
Torque:20 kg·cm (277.6 oz·in) @6.6V
Working Voltage: 6-7.4V
Min Working Current: 1A
No-Load Current: 100mA
# Spline: 25T(6mm in diameter)
The servo wire: 30cm(11.8inch) in length

Control Specifications:
Control Method: PWM
Pulse Width: 500~2500
Duty Ratio: 0.5ms~2.5ms
Pulse Period: 20ms

Wire Layout:
Red Wire: +
Black Wire: GND
White Wire: PWM/Signal

Please make sure that the duty cycle of the controller you are using conform to our specifications, otherwise the servo can't turn up to claimed degree


If you have any questions, please feel free to contact us, we will help you as soon as possible

Note:
Please be sure to avoid locked-rotor when using servo, locked-rotor means that artificially or machine obstructs the servo to rotate normally, the locked-rotor will lead to internal current increased to more than 7 times and the temperature increases, servo will burn out.

Notice for use:
1. It's recommended that use lithium polymer battery with high rate discharge(min 5C), please don't use dry battery.
2. Please use a short and thick power cord, don't use Dupont cord

Package Contents:
1 x Digital servo
1 x Servo horn kit(as shown in the figure)

20kg large torque. 20 kg·cm (277.6 oz·in) @ 6.6V. Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)
Full metal gear. it's better for accuracy, service life has been greatly increased
Aluminium Case. Enhance the heat dissipation, ensure that servo motor can work well
Using high-precision potentiometer with new design. Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of making robots.
270 degree rotation. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control. Can be rotated within 360 degrees when power off

 

Product description
Specifications:
Weight: 65g(2.32OZ)
Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)
Speed: 0.16sec/60°(7.4V)
Torque:20 kg·cm (277.6 oz·in) @6.6V
Working Voltage: 6-7.4V
Min Working Current: 1A
No-Load Current: 100mA
# Spline: 25T(6mm in diameter)
The servo wire: 30cm(11.8inch) in length

Control Specifications:
Control Method: PWM
Pulse Width: 500~2500
Duty Ratio: 0.5ms~2.5ms
Pulse Period: 20ms

Wire Layout:
Red Wire: +
Black Wire: GND
White Wire: PWM/Signal

Please make sure that the duty cycle of the controller you are using conform to our specifications, otherwise the servo can't turn up to claimed degree


If you have any questions, please feel free to contact us, we will help you as soon as possible

Note:
Please be sure to avoid locked-rotor when using servo, locked-rotor means that artificially or machine obstructs the servo to rotate normally, the locked-rotor will lead to internal current increased to more than 7 times and the temperature increases, servo will burn out.

Notice for use:
1. It's recommended that use lithium polymer battery with high rate discharge(min 5C), please don't use dry battery.
2. Please use a short and thick power cord, don't use Dupont cord

Package Contents:
1 x Digital servo
1 x Servo horn kit(as shown in the figure)

No reviews yet.

People who viewed this item also viewed

Compare