XT60 PDB Power Distribution Board

XT60 PDB Power Distribution Board

$12.90 $3.90
(No reviews yet) Write a Review

Frequently Bought Together

HOBBYMATE XT60 PDB Power Distribution Board - for FPV Racing Quadcopter Flight Controller, Support 3-6S Input, 5V/12V Output Support the LC filter

  • +++ HOBBYMATE XT60-PDB make the connection easy between the flight controller and PDB board and to the esc, what's more is if you don't have a socket for esc's, you can also solder the esc on the PDB board easy and make the building clean and clear
  • +++ HOBBYMATE XT60-PDB was integrated BEC 5v (3A) the 12v (0.5A) the output power for quadcopter camera, VTX, Receiver, Led Board and osd
  • +++ Made of 4 layer board, 35mm* 50mm size, can output 4 * 50A current at the same time.
  • +++ 5v output is designed for Flight Controller, VTX, Receiver, OSD. 12V output is designed Camera and LED board.
  • +++ HOBBYMATE-XT60 Power Distribution Board with a XT60 Integrated Plug, makes the connection to battery convenient

2oz Copper foil,4 layer,1.6mm PCB.
Support the LC filter,reduce wave interference
PDB Output 50Ax4,Max.65A
BEC Output 5V(3A)and 12V(500mA)
Include XT60 plug

BEC 5V Output:
Designed for RC Receivers,Flight controllers,OSD, and Servos.
DC/DC synchronous buck regulator.
Voltage:5.0 +/- 0.1VDC
Continuous current:2 Amps9(Max.2.5A 10s/minute)
Output Ripple:40mV 9VIn=16V, VOut=5V2A load) Short-circuit tolerant(5 seconds/minute)

BEC 12V Output:
Designed for Video TX or FPV camera with linear regulator.
The battery should be 4S LiPo (13~18V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant (2 seconds/minute) BEC 12V3S LiPo
Output voltage= 3S LiPo voltage -1V

Physical:
Dimensions:36 x 50 x 4 mm (without XT60)
Mounting:30.5 x 30.5mm, Φ3mm

Weight:7.5g (w/o XT60),11g(w/XT60)

Package Including

1 * HOBBYMATE XT60 Power Distribution Board
1 * 6PIN Connection Cable 

HOBBYMATE XT60 PDB Power Distribution Board - for FPV Racing Quadcopter Flight Controller, Support 3-6S Input, 5V/12V Output Support the LC filter

  • +++ HOBBYMATE XT60-PDB make the connection easy between the flight controller and PDB board and to the esc, what's more is if you don't have a socket for esc's, you can also solder the esc on the PDB board easy and make the building clean and clear
  • +++ HOBBYMATE XT60-PDB was integrated BEC 5v (3A) the 12v (0.5A) the output power for quadcopter camera, VTX, Receiver, Led Board and osd
  • +++ Made of 4 layer board, 35mm* 50mm size, can output 4 * 50A current at the same time.
  • +++ 5v output is designed for Flight Controller, VTX, Receiver, OSD. 12V output is designed Camera and LED board.
  • +++ HOBBYMATE-XT60 Power Distribution Board with a XT60 Integrated Plug, makes the connection to battery convenient

2oz Copper foil,4 layer,1.6mm PCB.
Support the LC filter,reduce wave interference
PDB Output 50Ax4,Max.65A
BEC Output 5V(3A)and 12V(500mA)
Include XT60 plug

BEC 5V Output:
Designed for RC Receivers,Flight controllers,OSD, and Servos.
DC/DC synchronous buck regulator.
Voltage:5.0 +/- 0.1VDC
Continuous current:2 Amps9(Max.2.5A 10s/minute)
Output Ripple:40mV 9VIn=16V, VOut=5V2A load) Short-circuit tolerant(5 seconds/minute)

BEC 12V Output:
Designed for Video TX or FPV camera with linear regulator.
The battery should be 4S LiPo (13~18V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant (2 seconds/minute) BEC 12V3S LiPo
Output voltage= 3S LiPo voltage -1V

Physical:
Dimensions:36 x 50 x 4 mm (without XT60)
Mounting:30.5 x 30.5mm, Φ3mm

Weight:7.5g (w/o XT60),11g(w/XT60)

Package Including

1 * HOBBYMATE XT60 Power Distribution Board
1 * 6PIN Connection Cable 

No reviews yet.

People who viewed this item also viewed

Compare