Jumper T16 Pro Hall Sensor Gimbal Open Source, Built-in Module Multi-protocol Radio Transmitter 2.4G 16CH 4.3" LCD; OpenTx Pre-Installed. Upgrade Type-C Charge and Folding Handle
T16 Pro Mode 2 (Left hand throttle) T16 Pro Mode 1 (Right hand throttle)
The T16 Pro is a full size multi protocol radio that runs the open source OpenTX. This pro version now includes a built in TX module freeing up the back slot for a long range system such as TBS Crossfire.
Size: 180*190*58 Weight: 798g (with 2 x 18650 batteries installed, not included) Voltage: DC7-8.4V Battery: 2 x 18650 (tray supplied) or 2S lipo (batteries not included) Current: 350mah (NO CRSF) Channel: 16ch
Features: STM32F429BIT6 MCU Industrial grade 4.3 inch 480*272 outdoor readable color screen Compatible with JumperTX (An independent fork of OpenTX) Wheel menu button Angle adjustable ultra-smooth dual bearing gimbals Multi-protocol transmitter module with TBS CRSF support Removable battery Supports Telemetry Memory 16M (can be expanded by TF card) Voice function Vibration reminder function Standard JR module slot 6-Flight Mode Buttons (for APM and Pixhawk flight controllers) Two-color LED status display
Jumper JP4-in-1 Module The Jumper JP4IN1 Module features the CC2500, NRF24L01, A7105 and CYRF6936 RF Chip modules all integrated on one board. This module can convert standard PPM signals form module equipped radios in to the RF protocols used by most radios in the market today (See RF Chip data below). This module is plug and play with module equipped radios in the FrSKY series and requires no complex wiring or “hacking” to get running. The module is a great way to improve the enjoyment of your flying experience, using a better radio such as the FrSKY Taranis series rather than the low grade radios commonly included with most kits offers an night and day difference in performance. The Jumper JP4IN1 module is also upgradable via USB input
JP4-in-1 Specifications: Working voltage: 6-9v Working current: <=100ma Operating frequency: 2.4G ISM band RF power: +22DBM Main control chip: STM32F103CBT6 (128K ROM, 20K RAM) Module bay compatibility: FRSky, Jr and other dimensions: 64*49*33 (without antenna) Net Weight: 42g (including antenna) Software Compatibility: Suitable for radios using OpenTX or er9x/ersky9x Firmware updatable: Yes, via USB. RF Chip Data Cypress Semiconductor CYRF6936: DSM/DSMX, Walkera Devo Texas Instruments CC2500: FrSky, Futaba SFHSS Amiccom A7105: FlySky, FlySky AFHDS2A, Hubsan Nordic Semiconductor NRF24L01: HiSky, Syma, ASSAN and most other Chinese models
JumperTX is a fork from the original OpenTX Project (links and information below) JumperTX is independently maintained and distributed by Jumper Technology. JumperTX is not affiliated with the OpenTX project.
Includes: 1x Jumper T16 Pro Radio Transmitter, 2020 Version 1x Li-Ion Battery Tray 1x USB Cable 1x Neck Strap 1x Screen Protector 1x Gimbal Parts
Firmware Update Both the v2.2.3 and v2.3 versions of JumperTX available for download from the Jumper site support the internal Multiprotocol module, but both have a bug with DSM/Spektrum on the internal module only. The bug has been fixed in the source code: https://github.com/JumperXYZ/JumperTX/pull/23 but new builds have not been released by Jumper.
If you use DSM/Spektrum receivers you must either:
Download the latest JumperTX 2.2.3 source from Github: https://github.com/JumperXYZ/JumperTX and compile it yourself, or
Flash the patched JumperTX firmware build (which was built from the Github source and first published here: https://www.rcgroups.com/forums/showpost.php?p=42917131&postcount=4692)
If you do not do this you will have problems with DSM receivers - inability to bind and/or unstable controls.
I have not the last version ,but it is a very good product and i like it.
Jumper t16 pro. It’s best product
Not what I got
I did not receive the Jumper T16 WITH Upgrade Type-C Charge and Folding Handle. No Type-C charge and Folding Handle.
Thanks Barry for your review, the new upgrade T16 pro transmitter is on pre-order begins on March 2020, your order was before the date. You can update it by yourself now by replacing the usb c type charge board, foldable handle, and top plate parts selling on hobbycool now.
Super happy customer ...
Recieved in perfect condituon
Reccomend this seller
As good as Promised with quick shipping.
I’ll admit that I was a little hesitant to order this as I read a few mixed reviews of the vendor and overseas orders ( and I hate the stupid pop-up notifications on the website). l’m glad I overlooked those concerns as the radio has exceeded all my expectations. I love that it can link to most common receivers and that it is highly configurable with Open TX. I’m even happier as Frsky seems to have doubled down on dropping interoperability and seeming to want to shut down the open standards that helped them get where they are. I’d fully recommend the T16. I can’t say I’m experienced enough to tell the difference between the standard and hall sticks, but for $10 or $20 more I’ll never have to worry about it.
The only con I can think of is the lack of built-in battery charging, but I’m not to worried as I’m charging all sorts of other batteries anyway.
We are shipping your orders contains T16 Pro V2 radio transmitters, by order date. We might be able to ship all of the transmitters in the next week, by the end of the week. The T16 Pro V2 radio transmitter is still on pre-order with price of $159.90, after one week the price will reverse back to $169.90. -- March 20, 2020 - HobbyCool
Sign up the newsletter for the Big Sale starts in the first week of April. -- March 25, 2020 - HobbyCool
HOBBYMATE D6 Duo Pro Charger Firmware 1.0.33 Update on Jane 10, 2020. Customers who bought this charger in or before Jan 10, 2020, we'd suggest to update the firmware to v1.0.33 Download the firmware HERE
Enter your email address below to join our mailing list and have our latest news and member-only deals delivered straight to your inbox.