Jumper T18 / T18 Pro is a new radio transmitter with a number of improvements based on Jumper T16 Pro V2
Improvements: 1. New IPS 480*272 Screen 2. Carbon Fiber Style Faceplate 3. New internal multiprotocol module JP5in1, with 915 MHz long range module, support Frsky R9 915MHz long range receiver system, with included external antenna 4. Touch screen interface reserved inside the T18 / T18 Pro transmitter for future update. 5. Newly improved hall sensor gimbals for T18 based on T16 Pro V2, and ALPS RDC90 sensor (which is used by Futaba T18MZ) for T18 Pro transmitter. 6. No more ribbon cables! Simple and reliable connection between the radio components means no more problems with switches or roller stop working.
Mode Option: Jumper T18/T18 PRO Radio Conversion Mode 2 (Left Hand Throttle) to Mode 1(Right Hand Throttle)
The T18 / T18 Pro is a full size multi protocol radio that runs the open source OpenTX. Both version now includes a built in TX module freeing up the back slot for a long range system such as TBS Crossfire, and added module into JP5in1 915Mhz Long Range System Receiver, with external 915Mhz Antenna included.
Basic Specifications: Size: 180*190*58 Weight: 798g (with 2 x 18650 batteries installed, not included) Voltage: DC7-8.4V Battery: 2 x 18650 (tray supplied) or 2S lipo (batteries not included) Current: 350mah (NO CRSF) Channel: 16ch
Features: STM32F429BIT6 MCU Industrial grade 4.3 inch IPS 480*272 outdoor readable color screen Wheel menu button Angle adjustable ultra-smooth dual bearing gimbals Multi-protocol transmitter module with TBS CRSF support Removable battery Supports Telemetry Memory 16M (can be expanded by TF card) Voice function Vibration reminder function Standard JR module slot 6-Flight Mode Buttons (for APM and Pixhawk flight controllers) Two-color LED status display
Jumper JP5-in-1 Module The Jumper JP5IN1 Module features the CC2500, NRF24L01, A7105 and CYRF6936 RF Chip modules all integrated on one board, with added 915MHz Module. This module can convert standard PPM signals form module equipped radios in to the RF protocols used by most radios in the market today (See RF Chip data below), and works with Frsky R9 long range receiver system. This module is plug and play with module equipped radios in the FrSKY series and requires no complex wiring or “hacking” to get running. The module is a great way to improve the enjoyment of your flying experience, using a better radio such as the FrSKY Taranis series rather than the low grade radios commonly included with most kits offers an night and day difference in performance. The Jumper JP5IN1 module is also upgradable via USB input
JP5-in-1 Specifications: Working voltage: 6-9v Working current: <=100ma Operating frequency: 2.4G ISM band RF power: +22DBM Main control chip: STM32F103CBT6 (128K ROM, 20K RAM) Module bay compatibility: Frsky, Frsky R9, Jr and other dimensions: 64*49*33 (without antenna) Net Weight: 42g (including antenna) Software Compatibility: Suitable for radios using OpenTX or er9x/ersky9x Firmware updatable: Yes, via USB. RF Chip Data Cypress Semiconductor CYRF6936: DSM/DSMX, Walkera Devo Texas Instruments CC2500: FrSky, Futaba SFHSS Amiccom A7105: FlySky, FlySky AFHDS2A, Hubsan Nordic Semiconductor NRF24L01: HiSky, Syma, ASSAN and most other Chinese models
Includes: 1x Jumper T18 /T18 Pro Radio Transmitter 1x Li-Ion Battery Tray 1x USB Cable 1x Neck Strap 1x Screen Protector
слабоват встроенный р9, нет поддержки сенсорного экрана, а так отличный аппарат.
Télécommande reçue dès disponibilité du produit (précommande)
Testé aujourd'hui que sur simulateur pour l'instant, mais très satisfait du produit. Finition très correcte et customisable à souhait.
je recommande !
great support, great tx
support was happy to switch out my t16 pro order for this since they were out of stock, this has worked great so far, just word of warning it does not come with a lipo or 18650 cells, you need to buy your own to power the tx
Jumper T16 Pro Hall - good transmitter!
A few words about the radio. I bought the T16 Pro Hall in November 2019. I have been using it since that time and I can say that I'm almost happy with it. Great design, nice sticks, big screen, etc. But after a while, problems started with ribbon cables. I had to disassemble the radio several times and swap the cables for multiple switches and scroll wheel. The noisy scroll wheel is also a bit annoying, I'll try to change it to metal. Overall, this is a good transmitter, especially the V2 version. The T18 version was not successful in design for my taste :)
The jumper T16 is an awesome upgrade to the radio I was using. The features this transmitter offers at the price point are amazing. Love it and would highly recommend.
Dear all customers, we've got shipping forwarder's notification that all shipping may run much slower than usual due to well known reason all over the world now. We suggest you to choose Dedicated Shipping Service rather than Registered Airmail or Standard Shipping if it is available when you check out your order to get it as soon as possible. April 15, 2020
For more information about shipping orders internationally, please check this page
Enter your email address below to join our mailing list and have our latest news and member-only deals delivered straight to your inbox.